Used engine oil should be disposed of by all these methods EXCEPT ________
A) Disposed of in regular trash B) Burned on-site in a waste oil-approved heater
C) Burned off-site in a waste oil-approved heater D) Shipped off-site for recycling
A
You might also like to view...
When a parallelism tolerance (MMC) is applied to a feature of size, the deviation is often verified by passing the feature of size through a(n) ____________________ condition boundary.
Fill in the blank(s) with the appropriate word(s).
A refrigerated fixture that operates with an evaporator temperature of 35°F (2°C) is classified as a _____.
a. moderate cooling application b. low-temperature application c. medium-temperature application d. high-temperature application
Used typically for symmetrical objects; the cutting-plane line actually cuts through one quarter of the part. The sectional view shows half of the interior and half of the exterior at the same time.
A. Full section B. Half section C. Broken out section D. Removed section E. none of the above
Technician A says that the computer can be used to control the output of the alternator by controlling the field current. Technician B says that voltage regulators control the alternator output by controlling the field current through the rotor. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician