Which of the following statements is false?
A. When a binary mixture is at its bubble point, it contains almost all liquid and the first bubble of vapor.
B. When a binary mixture is at a pressure above its bubble point at that composition, it will be a single liquid phase.
C. When a binary mixture is at a temperature below its dew point at that composition, it will be a single liquid phase.
D. When a binary mixture is at a pressure between its bubble point and dew point at that composition, it will be contain both a liquid and vapor phase.
E. None of the above are false.
A. Incorrect. This is true. This is the definition of (and reason for the name of) the “bubble” point.
B. Incorrect. This is true. You may be confusing temperature and pressure. When the pressure is above the bubble-point pressure, only a liquid phase remains.
C. Incorrect. This is true. You may be confusing temperature and pressure. When the temperature is below the dew-point temperature, only a liquid phase remains.
D. Incorrect. This is true. Refer to any Pxy plot in Chapter 10 to see this.
E. Correct. Each statement is true.
You might also like to view...
Shorter runners in a port fuel injected engine provide which of these?
A) Minimum low-RPM power B) Minimum high-RPM power C) Increased low-RPM power D) Increased high-RPM power
Leaks in commercial refrigeration systems must be repaired if they have an annual leak rate of:
A) 10 percent of the charge per year. B) 15 percent of the charge per year. C) 25 percent of the charge per year. D) 35 percent of the charge per year.
What is an "air-over" motor?
A) A motor that is cooled by airflow over the motor B) A motor whose function is to blow air over the fan motor to cool it C) A motor that is designed to be installed on the bottom of a fan unit D) A motor that is designed for units with the fan located at the top of the unit
?The most efficient method to draw teeth is to:
A. use a gear tooth caliper B. draw one tooth then trace the rest C. use a gear template D. All of the above can be used.