An area that must be inspected before work activities proceed is a _____
A) root gap B) hold point C) root pass D) mismatch
B
You might also like to view...
When used in a dehumidification application, the purpose of a heat pipe heat exchanger includes _____.
a. removing latent heat from the air supply b. pre-cooling the air entering the evaporator c. preheating the air entering the evaporator d. providing emergency heat if the compressor fails
How does adhering to codes and standards help control welding costs?
What will be an ideal response?
A car comes in the shop with a no crank and no sound from the solenoid complaint. The technician turns on the headlights and moves the ignition to the “start” position. The brightness of the headlights stays the same and the complaint is verified. All of the following could be the cause of the problem EXCEPT:
a. an undercharged battery. b. a faulty clutch switch. c. a bad starter. d. an open in the starter circuit.
The preferred practice is to align an auxiliary view with its principal view when possible, which generally makes it easier to read the print. However, there is an option to rotate an auxiliary view when the normal auxiliary view placement takes up too much space on the sheet. When this is done, a viewing-plane line is used to indicate from where the view is taken, and the auxiliary view is placed in any desired location on the sheet. The auxiliary view is rotated as needed and the angle and direction of rotation is specified under the view title.
Answer the following statement true (T) or false (F)