A monitor that has not run to completion will indicate ________ on the scan tool
A) Monitor in progress B) Pending
C) Incomplete D) Vacant
C
You might also like to view...
Which of the following statements is accurate?
An ammonia synthesis process works as follows: Fresh feed air and hydrogen are combined with a recycle stream and the combined stream is compressed to 10 MPa. The compressed stream enters a reactor, and a fraction of the entering nitrogen and hydrogen are converted into ammonia. The reactor effluent, still at 10 MPa, enters a condenser. The liquid and vapor streams leaving the condenser are in VLE. The liquid stream, which is almost pure ammonia, is the product. A fraction of the vapor stream leaving the condenser is purged, while the rest is recycled. A. Raoult’s Law would be a reasonable way to model the VLE for ammonia in the condenser. B. Henry’s Law would be a reasonable way to model the VLE for oxygen in the condenser. C. If we increase the size of the reactor, allowing a larger fraction of the nitrogen and hydrogen to be converted to ammonia, it won’t lead to an increase in the liquid product flow rate, because the product flow rate is limited by the equilibrium constraint in the condenser. D. If we maintain the same flow rate of entering feeds, but we purge a smaller fraction of the vapor leaving the condenser, then the mole fraction of oxygen in the purge stream will go down. E. None of the above are true.
Digital instrument clusters use what type of displays to notify the driver of monitored system conditions.
What will be an ideal response?
Technician A says that objects with high permeability allow magnetic lines of flux to flow easily through their material. Technician B says that some objects are good insulators that will not allow magnetic lines of flux to flow through their material. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
The voltage follower is not used as a
A) isolation amplifier. B) low pass filter. C) non-inverting amplifier. D) unity gain amplifier. E) comparator.