A buck is a _____
a) type of concrete block
b) type of floor form
c) a frame for making window and door openings
d) a name used for a certain type of interior partition
c
You might also like to view...
Liquid ethanol with a density of 49.3 lbm/ft3 flows through a nozzle. At the inlet of the nozzle, the ethanol has a velocity of 10 ft/s, and the velocity of the ethanol at the outlet is 110 ft/s. The cross-sectional area of the outlet is 0.0075 ft2.
(a) Determine the cross-sectional area of the outlet, assuming that the nozzle operates at steady-state, steady-flow conditions. (b) Using your equations, for a constant outlet condition, plot the cross-sectional area of the nozzle inlet as the inlet velocity varies from 2 ft/s to 100 ft/s. Given: p= 49.3 lbm/ft3; V1 = 10.0 ft/s; V2 = 110 ft/s; A2 = 0.0075 ft2 What will be an ideal response?What will be an ideal response?
What components are installed to increase the power factor and decrease the cost of electricity caused by large inductive loads?
a. Capacitors b. Diodes c. Rectifiers d. Resistors
Many people suffer from allergic reactions to the _____________________ produced by weeds
Fill in the blank(s) with correct word
Technician A changes the position of a waste-spark ignition coil to diagnose an ignition misfire. Technician B says that a defective coil should cause problems on the cylinders it is connected to. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician