Sunscald is a nonpathogenic symptom caused by light
Indicate whether the statement is true or false
False
You might also like to view...
For insulating a cylindrical vessel 14' in diameter with 3.5" thick block, how many lags per course will be required if the lag’s outer width is 4.5"?
a. 119 b. 121 c. 123 d. 125
In most commercial air handlers
A) the blower draws the air across the coil B) the air passes through the unit twice: once for the blower and another time for the coil C) the blower and coil are located in separate component parts of the system D) the blower forces the air across the coil
A J groove weld is to be made at a joint on the arrow side. The weld is to undergo a nondestructive radiographic test and the angle at which the test is to be made is 25° from vertical. Which of the following describes how this welding symbol will look?
A. The reference line has the symbol for a J groove weld under it. The notation "RT" is on the top of the reference line. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. B. The reference line has the notation "RT" under it along with the symbol for a J groove weld. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. C. Two parallel reference lines are used and they are both connected to the leader line. The lower reference line has the notation "RT" under it, and the upper reference line has the symbol for a J groove weld under it. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. D. Two parallel reference lines are used and they are both connected to the leader line. The upper reference line has the notation "RT" under it, and the lower reference line has the symbol for a J groove weld under it. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. E. none of the above
When the quantity of refrigerant flow to an evaporator is reduced, the amount of superheat in the vapor leaving the coil will ____________________.
Fill in the blank(s) with the appropriate word(s).