If there are three lines of dimensions on the outside of a floor plan, describe the features that are typically dimensioned at each line of dimensions:
What will be an ideal response?
The first line of dimensions on the plan is the smallest distance from the exterior wall to the center of windows, doors, and partition walls. The second line of dimensions generally gives the distance from the outside walls to partition centers. The third line of dimensions is usually the overall distance between two exterior walls.
You might also like to view...
The compounds A and B form non-ideal solutions in the liquid phase. At 50 ?C, a mixture of A and B has an EXCESS molar enthalpy as given below:
The heat capacities of the liquids are modeled as constant. Both are equal to CP=50 J/mol-K.
In a steady-state, constant pressure process, 1000 mol/min of pure A at 25 ?C is mixed with 500 mol/min of pure B at 35 ?C. The mixture then enters a heat exchanger in which the mixture is heated to 50 ?C.
A. Determine the rate at which heat is added to the heat exchanger.
B. If we are using a reference state in which the molar enthalpy, ?H, of pure A and pure B are both 0 at a temperature of 25 ?C, then what is the partial molal enthalpy, ¯H, of compound A in the mixture that is leaving the heat exchanger?
Electricity will NOT generally cause:
A. Loss of muscle control coordination B. Internal bleeding C. Dementia D. Cardiac arrest
A typical evaporator operating temperature in an air-conditioning system is ____.
A. 40°F B. 55°F C. 75°F D. 200°F
____ are used to remove shoes that have been worn and are ready to be taken off.
A. Nippers B. Hammers C. Rasps D. Clinch cutters