Two technicians are discussing the purpose of a transfer case in a four-wheel-drive system. Technician A says it transfers power to an additional axle. Technician B says some transfer cases have two speeds. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both Technicians A and B
D) Neither Technicians A nor B
C
You might also like to view...
If you are not sure which filler metal to use, a good general rule is that a lower strength or grade can be used successfully, but a little stronger or higher grade seldom works.
Answer the following statement true (T) or false (F)
You have 275 acres of soybeans with an expected yield of 45 bushels per acre. The combine, with a 25-foot reel, travels 3.8 miles per hour. The harvesting efficiency of the field is 0.80.
a. Calculate the harvesting capacity of the combine using the following formula: HC = (S ×W× EFF ×Y)÷8:25 Where: HC is the harvesting capacity, bu/hr. S is the combine speed, mph. W is the combine harvesting width, ft. EFF is the harvesting efficiency of the field. Y is the yield, bu/acre. b. How many bushels of soybeans do you expect? c. How many hours does it take to harvest the soybeans?
Answer the following statement(s) true (T) or false (F)
1. In solid conductors, the transfer of electrical charges is made by the movement of electrons. 2. If a magnesium atom loses electrons (negative charges) and is now positively charged, it is called a positive ion. 3. Conduction in solutions, known as electrolytes, consists of the movement of free positive and negative ions in the same direction. 4. When plating an object with copper from a cyanide solution, the object to be plated must be an electrical conductor. 5. In any electroplating process, the solution must contain the ions of the metal that is to form the coating.
?If the lock-to-lock steering wheel rotation is 3:25 turns and the total front wheel movement is 78 degrees the steering ratio is:
A. ?13:1 B. ?15:1 C. ?17:1 D. ?19:1