If the frequency increases in Figure 12-1, the phase angle ________ and the impedance ________
A) increases, decreases B) decreases, decreases
C) increases, increases D) decreases, increases
C
You might also like to view...
Briefly describe a safe and easy way to flush all brake systems when you do not have a dedicated scan tool for the vehicle.
What will be an ideal response?
Also referred to as standard parts, these parts are manufactured and available from outside vendors.
a. vendor parts b. manufactured parts c. purchase parts d. common parts
The compressor in an existing split system is being replaced. The system has a 35 foot line set. The factory charge for the condensing unit is 80 ounces. The installation instructions state that the factory charge assumes a line length of 15 feet and gives the per foot adjustment as 0.6 ounces per foot. How much refrigerant should be added to the system after the system has been evacuated?
A) 80 ounces B) (35-15 ) × 0.6 = 12 ounces C) 80 ounces + (35 × 0.6 ) = 101 ounces D) 80 ounces + ((35-15 ) × 0.6 ) = 92 ounces
How can you use the Scale tool to set an object's exact length or height? What do you do when the dimension that you want to use is in inches? And how does this differ from using the Tape Measure tool for resizing?
What will be an ideal response?