Give an example of a condition that can make a system appear overcharged even though the charge is correct
What will be an ideal response?
Low airflow over the condenser or non-condensable gasses
You might also like to view...
Place the following noncondensing steam turbine startup procedures in order.
____ Verify the lube oil and cooling water are in service. ____ Communicate with the team that the turbine is ready. ____ Open turbine case drains. ____ Slow roll the steam turbine. ____Observe the steam coming out of the drains and, when it becomes dry, completely open the low-pressure steam valve and close the drain valve. ____ Unblock the high-pressure steam. ____ Ensure that the driven equipment connected to the steam turbine is ready for startup. ____ Adjust turbine speed as needed. ____ Open the low-pressure steam valve slightly
Para evitar que la zapata de curvatura de un solo accionamiento realice marcas al curvar aluminio rígido, debe:
a. utilizar una zapata de mayor diámetro que la tubería eléctrica. b. recubrir la tubería eléctrica con WD-40 o vaselina. c. utilizar la bomba hidráulica rápidamente. d. envolver el conducto con trapos.
Components of a transformer are:
A) Primary coil B) Core C) Secondary coil D) All of the above
Add the following decimal fractions: 3.125 0.25+1.125
What will be an ideal response?