In a composite slab, the slab form is _____.
a. corrugated steel
b. reinforced HDO plywood
c. steel pans with overlapped flanges
d. 1/4" steel plate
a. corrugated steel
You might also like to view...
Air enters an uninsulated nozzle at 5 m/s, 500 kPa, and 50°C. The cross-sectional area of the inlet is 0.0002 m2. The air exits at a velocity of 120 m/s and a temperature of 48°C. Determine the heat transfer rate for the nozzle.
Given: Air, P1 = 500 kPa; T1 = 50°C = 323 K; V1 = 5 m/s; A1 = 0.0002 m2; V2 = 120 m/s; T2 = 48°C = 321 K What will be an ideal response?
When erecting a gable roof, which portion of the rafter is nailed to the ridgeboard?
a. the bird's mouth b. the plumb cut c. the tail cut d. the seat cut
During cellular division, polar bodies arise as a result of the most ____________________ or cell material outside the nucleus
Fill in the blank(s) with correct word
The subsequent problems deal with the figure below. Assume all outputs are low to begin with unless indicated otherwise.
Given that RA4 is an open-drain output, what does the following PicBasic code do?Low PORTA.4
A. turns off LED L3 (if it was on to begin with) B. turns on LED L3 (if it was off to begin with)