A steering imbalance or low power assist in both directions may be caused by all of the following EXCEPT:
a. Defective rack seals
b. Defective rotary valve rings or seals
c. Worn lower control arm bushings
d. Restricted power steering lines or hoses
c. Worn lower control arm bushings
You might also like to view...
CarryALL, Inc., makes and sells small cargo trailers to individuals and small businesses. Since its opening in 1990, it has allocated indirect costs (IDC) to its three manufacturing plants based on direct materials cost per unit. Each plant builds different models and sizes. Because of advances in automation and materials, Judy, the CFO, plans to use build-time per unit as the new basis. Build-time is the average number of work-hours to complete a trailer. However, she initially wants to determine what the allocation would have been this year had the build-time basis been used prior to the incorporation of new technology and materials. The data shown below represents average costs and times. Use this data and the bases indicated to determine the allocation rates and IDC
allocation of $1,000,000 for this year for the three bases.
 FIGURE 1.png)
All of the following are compressed air safety precautions except:
A. Never spin dry bearings B. Use ear protection with pneumatic tools C. Use compressed air to blow dirt off of clothing and skin D. Check and maintain hoses and fittings
The simplest form of economizer control is the _____
a. powered exhaust method b. integrated method c. dry-bulb method d. enthalpy method
To get proper ventilation damper orientation and adequate filtration systems into the design of a new
building's HVAC equipment, one should consider outside air duct locations, neighboring pollutant sources, and the _____. a. prevailing wind conditions at the site b. layout of the pneumatic control systems c. required humidifier/ dehumidifier capacity d. amount of insulation being added to the walls