The ____ is created by rubbing a piece of soft iron with a piece of magnetite.
A. artificial magnet
B. electromagnet
C. permanent magnet
D. temporary magnet
Answer: A
You might also like to view...
What is a Type X gypsum board?
What will be an ideal response?
The ____ control circuit is often referred to as the basic circuit.
A. three-wire B. forward-reverse C. start-stop push-button D. air-conditioning
In certain cases, the function of a part may require locating and orienting a feature size at RFS. If the location and orientation of a hole are being controlled relative to the outside surfaces of the part and a tolerance of position at RFS is applied to the hole, the ____________________must be within its size limits.
Fill in the blank(s) with the appropriate word(s).
Before working with a chemical product, always _____.
a. check with your supervisor b. refer to the OSHA regulations c. locate and carefully read the SDS d. identify the location of a fire extinguisher