What is a note that applies to an entire drawing or an entire set of drawings called?
a. Local note
b. Specialized note
c. Requirement note
d. General note
e. None of the above
d. General note
You might also like to view...
What type of edge preparation is required on part A?
Refer to Drawing Number 750098A on page 115 for the following questions.
The three main types shaft misalignment are parallel, angular, and __________
A. horizontal. B. vertical. C. combination horizontal and vertical. D. combination angular and parallel.
CAD technicians who perform quantity takeoffs are called upon to determine the ____ of steel reinforcing bars needed for the project.
A. linear feet B. cubic tons C. total number D. tensile strength
In certain applications, the function of a part requires defining the concentricity deviation of a cylindrical feature of size relative to a datum axis. In this application, the ____________________ distance between median points of the toleranced diameter and the datum axis is half the concentricity tolerance value.
Fill in the blank(s) with the appropriate word(s).