In certain applications, the function of a part requires defining the concentricity deviation of a cylindrical feature of size relative to a datum axis. In this application, the ____________________ distance between median points of the toleranced diameter and the datum axis is half the concentricity tolerance value.
Fill in the blank(s) with the appropriate word(s).
ANS: maximum
You might also like to view...
There are several options for installing electrical panels. Rank them according to cost; "1" being the least expensive, "2" the next higher cost, "3" most expensive.
A. ________ In an alcove off the corridor. B. ________ Flush mounted. C. ________ Surface mounted.
Studies show that about 2/3 of mergers do not have synergies produced.
Answer the following statement true (T) or false (F)
A rural primary road segment of 2 miles long has an average annual daily traffic (AADT) of 11,350. The number of crashes that have occurred over the past 5 years are 5 fatal, 55 injury crashes, and 100 property damage only crashes. Statewide average crashes for this type of roads are 2 fatal, 130 injury, and 300 property damage only crashes per 100 MVMT. The weight factors for fatal, injury, and property damage only crashes are 8, 3, and 1 respectively. Using the critical crash ratio methodology, determine whether this site can be labeled a hazardous site, using a 95 percent confidence limit.
What will be an ideal response?
The secondary ignition circuit can be tested using ________
A) An ohmmeter B) Visual inspection C) An ammeter D) Both A and B