When there is no current draw and the starter does not rotate, the cause could be
A. open field windings
B. open armature coils
C. broken brushes or springs
D. All of the above
Answer: D
You might also like to view...
While having a discussion, Technician A says that when blow-drying a bearing, you must allow it to spin. Technician B says that allowing it to spin is a bad idea. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
Technician A says that all injectors in a sequential fuel injection system often use the same power wire. Technician B says that each injector in a sequential fuel injection system should have a different ground wire. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
When you are installing interior wood doors, it is important to remember that four hinges must be used
when the door height is greater than _____. a. 6-1/2 feet b. 7 feet c. 8 feet d. 9 feet
A 74191 MOD-16 up/down counter is configured so that the TCd output is wired to the Load input. If the counter is loaded with 1001 and counts down continuously, what is its effective modulus?
A) MOD-10 B) MOD-9 C) MOD-12 D) MOD-7