The time it takes for a square wave to go from 90% to 10% of its voltage level is called
A) fan-out. B) propagation delay. C) fall time. D) rise time.
C
You might also like to view...
To prevent the liquid contents in a pipe from freezing, engineers often apply coils of heated wire or tubing called:
a. Insulation b. Heat shielding c. Heat tracing d. Steam traps
Explain the difference between horizontal and vertical alignment.
What will be an ideal response?
For a GAL22V10, if the output from one pin is internally fed back to the input of another OLMC then the propagation time of the second pin would ________
A) decrease B) increase C) be unchanged D) cannot predict
A 0.5625" diameter hole is drilled in the block shown before a tapping operation. The block is tapped with a 5/8" diameter tap drill. Find, in inches, the difference between the two diameters expressed as a common fraction in simplest form.
What will be an ideal response?