Use the following engine dimensions to calculate the compression ratio if the engine is bored 0.030 inches oversize
Original bore: 4.000 in. Stroke: 3.000 in. Gasket thickness: 0.040 in.
Deck height: 0.020 in. Piston dish volume: 6.0 cc Combustion chamber volume: 64.0 cc
What will be an ideal response?
8.6:1
You might also like to view...
?How can the weld bead be cleaned up?
A. ?hand wire brush B. ?chipping hammer C. ?punch and hammer D. ?All of the above
Technician A says that using lower octane fuel in vehicles designed for premium fuel will cause serious engine damage. Technician B says that some octane boosters will cause discoloration of the porcelain on the spark plug tip. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
A source, a path, and a load ________
A) do not make up a complete circuit B) will allow current to flow if the switch is open C) can only be an open circuit D) make up a basic circuit
The major concern with ammonia refrigerant is:
A) It is much more expensive than halogenated refrigerants. B) It is poisonous and flammable. C) It can only be used with copper, brass, and aluminum. D) Its normal operating pressures are extremely high.