A workpiece that is to be clamped to the machine table, can be aligned with the table axis by:

A) Placing it against stops in the T-slots
B) Indicating the side of the workpiece
C) Measuring from the edge of the table to the side of the work
D) All of the above


D

Trades & Technology

You might also like to view...

A steel casting weighing 2 kg has an initial temperature of 500°C; 40 kg of water initially at 25°C is contained in a perfectly insulated steel tank weighing 5 kg. The casting is immersed in the water and the system is allowed to come to equilibrium. What is its final temperature? Ignore the effects of expansion or contraction, and assume constant specific heats of 4.18 kJ? for water and 0.50 kJ? for steel.

What will be an ideal response?

Trades & Technology

What are the three sets of activities that a DR team develops for each possible disaster scenario? How are these sets of activities ordered in a DR binder?

What will be an ideal response?

Trades & Technology

Part winding starters are not suitable for use with delta-wound, ____ motors.

a. single-voltage b. single-phase c. dual-voltage d. dual-purpose

Trades & Technology

If the average transpiration (T) loss from leaf surfaces in a particular watershed is 10 mm/day, you expect the evaporation (E) from the soil surface to be ________

A) 5 mm/ day B) 10 mm/ day C) 15 mm/day D) 100 mm/day E) impossible to calculate from the data given

Trades & Technology