Define the term “median.”
What will be an ideal response?
The middle value.
You might also like to view...
Which of the following is not a basic cause of stress in organizations?
a. Role demands b. Interpersonal demands c. Physical demands d. Personal demands e. Task demands
A nonmetal plate (k = 0.05 W/m•K) and an ASME SA-240 stainless steel plate (k = 15 W/m•K) are bolted together by ASTM B21 naval brass bolts. Both plates have a thickness of 38 mm, and the brass bolts are bolted through both plates. The bottom steel plate surface (surface 1) is subjected to a uniform heat flux of 200 W/m2. The top nonmetal plate surface (surface 2) is exposed to convection at an air temperature of 20°C and a convection heat transfer coefficient of 5 W/m2•K. Also, thermal radiation exchange occurs between the upper plate surface and the surrounding surface temperature of 30°C. The emissivity of the plate surface and the bolts is 0.3. The ASME Boiler and Pressure Vessel Code (ASME BPVC.IV-2015, HF-300) limits the maximum use temperature to 260°C for the SA-240 steel
plate. The ASME Code for Process Piping (ASME B31.3-2014) limits the maximum use temperature of B21 bolts to 149°C. Determine whether both ASME codes are being complied with under these conditions
What will be an ideal response?
The ____ for a pre-engineered metal building consists of the columns that are attached to the floor system by anchor bolts and the beams that are attached to the columns.
A. rigid frame B. structural outline C. column-beam support D. skeleton structure
A side of a house measures 10 feet by 15 feet. There is one window which measures 3 feet by 4 feet. The wall is a wood frame with siding and 3 1/2 inch insulation + 1 inch polystyrene sheathing (R-16). The window is single pane plus storm window. Find the heat load for the window for a 70° F design temperature difference.
Fill in the blank(s) with the appropriate word(s).