It is important to determine the relationship of one drawing to another. This is called ____ the drawings.
A. connecting
B. elevating
C. comparing
D. orienting
Answer: D
You might also like to view...
When the seam weld symbol is located ____ the reference line, the dimensions can be placed on either side of the reference line.
A. on top of B. astride C. below D. above
How is the quantity "noise criteria", or NC, used?
A) To assess the background noise in a space. B) To quantify the dbA in a space from a piece of equipment. C) To measure the frequency distribution of noise in a space.
Range is defined as:
a. the portion of the process controlled by the controller. b. the difference ? between the upper and lower range limits. c. is designed to reduce the difference between the set point and process variable by adjusting the controllers output continuously until the offset is eliminated d. enhances controller output by increasing the output in relationship to the changing process variable.
Convert binary 10101010 to octal
A) 2558 B) 2068 C) 2528 D) 5228