Technician A says that an adjustable wrench has a box end on one end and an open end at the other end. Technician B says that a combination wrench has a box end at one end and an open end at the other end. Which technician is correct?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
B
You might also like to view...
Dimensions and fabrication specifications are commonly included in general assemblies.
Answer the following statement true (T) or false (F)
A passive-type wheel speed sensor (WSS) is being checked for the proper resistance which should be 800—2,500 ohms. The meter reads 1.1 K? . This means ________
A) The sensor has a normal resistance reading B) The sensor is electrically open C) The sensor is grounded D) The sensor is electrically shorted
Mixed format: 
(with a space between the whole number and the numerator)Fraction format: 
Reduce all fractions. An electrician uses 
feet of push-back wire from a 200-foot roll. How many feet of wire are left on the roll?
Fill in the blank(s) with the appropriate word(s).
When placing a ladder against a platform or roof, the top of the ladder should extend above the point where
the ladder touches the platform or roof by at least _____. a. 2 feet (61 cm) b. 3 feet (91 cm) c. 4 feet (1.2 m) d. 5 feet (1.5 m)