Information which is stored in an EPROM
A) can be erased by prolonged exposure to ultraviolet light.
B) can be erased by applying high voltage to each storage location.
C) is stored by the manufacturer and cannot be changed.
D) is lost if power is interrupted.
A
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. With variable torque loads, the torque varies as the square of the speed. 2. The electronic shear pin reacts to the amount—and rate —of current increase to the motor. 3. The half-wave rectifier circuit requires two diodes and the use of a center-tapped secondary AC transformer. 4. In a three-phase rectifier system, the DC level remains high and the ripple percentage is very low; therefore, the DC supply needs very little filtering. 5. The armature power is typically controlled by an SCR that is turned on at different points in the waveform to adjust the voltage to the motor armature to control the speed.
Shading materials are often applied to glass, as well as polyethylene, greenhouses in the spring and summer to reduce the temperature within the greenhouse
Indicate whether the statement is true or false
What are the benefi ts of cellulosic-ethanol and algae-based biodiesel? Using the Internet, research these technologies and produce a paper predicting when they will have an impact on the need to fi nd economic alternate-energy sources.
What will be an ideal response?
The ____ utility manages a firewall and packet filtering.
A. iptables B. netstat C. passwd D. wall