The Zener diode is a diode specially designed for ____.
a. rectification
b. voltage regulation
c. visual displays
d. changing AC to DC
b. voltage regulation
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. The tolerance zone for a flatness tolerance is the space between two perpendicular planes. 2. If a flatness tolerance is applied to a surface, the high and low points of the surface must be within the tolerance zone. 3. If the limit of the flatness deviation provided by Rule #1 is sufficient for the function of the application, there is no need to specify a flatness tolerance. 4. Where a flatness tolerance is applied to a surface that is associated with a size dimension, and Rule #1 applies to the size dimension, the flatness tolerance value must be more than the size tolerance. 5. A dial indicator, also known as a dial gage and probe indicator, is an instrument used to accurately measure small linear distances, and is frequently used in inspection of parts.
For laminating gypsum boards to each other, joint compound adhesives and ____ adhesives are used.
a.visible light curing b.contact c.thermoplastic d.reactive
____ is a suitable substitute for wood columns, which require regular maintenance and are susceptible to water damage.
A. PVC B. Composite C. Fiberglass D. Metal
Consider a circuit needing a flow switch with two separate contacts, one normally open and the other normally closed. When one switch changes position, the other switch changes position. What happens if a flow switch with two separate switches cannot be obtained?
What will be an ideal response?