A test weld is done on scrap pieces of metal that are the same thickness and type of metal as the parts to be repaired.
Answer the following statement true (T) or false (F)
True
You might also like to view...
The acceptable industry standard for chipped brick usually is not more than _____ percent of the exposed face area of a brick wall or project.
A. 15 B. 10 C. 5 D. 1
Technician A says that a good relay should measure between 60 and 100 ohms across the coil terminals. Technician B says that OL should be displayed on an ohmmeter when touching terminals 30 and 87. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
_____ estimates are prepared from completed drawings and specifications.
a. Change order b. Field c. Detailed d. Resource
Technician A says that the brake pedal should be depressed with as much force as possible during the normal bleeding procedure. Technician B says that the brake pedal should be pumped rapidly during this manual bleeding procedure to force the air down toward the bleeder valve(s). Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B