Explain the places that need to be lubricated on a spray gun.
What will be an ideal response?
Spray guns must be lubricated following cleaning. When the adjustment knobs are under pressure from their springs, they may become difficult to turn if not lubricated. The trigger connecting screw should also be lubricated to keep it working smoothly. This lubrication should be applied thoroughly but sparingly, to avoid contact with the finish in the gun. The spring for the fluid control knob should be lightly coated with petroleum jelly before reinstalling it after cleaning.
You might also like to view...
The sustainable method of design consists of five elements: schedule, cost, quality, ____, and the environment.
A. maintenance B. materials C. quantity D. people
Why do you think risks associated with advanced technologies are less acceptable than those from known technologies?
What will be an ideal response?
What is the function of the memory seat system?
What will be an ideal response?
The chemical most often used for pasteurization of greenhouse root substrate is _____________ It is used at the rate of ______ pound per cubic yard of substrate. It should not be used below a temperature of ____ oF. The treated root substrate should be covered for ____ days. It is then aerated for _____ days before handling. Seeds can be planted in it _____ days and cuttings ____ days after
aeration began. Fill in the blank(s) with correct word