Describe and explain the basic function of the vernier caliper.
What will be an ideal response?
The vernier caliper consists of a stationary bar and a movable vernier slide assembly. The station rule is a hardened graduated bar with a fixed measuring jaw. The movable vernier slide assembly combines a movable jaw, a vernier plate, clamp screws, and an adjusting nut. The vernier slide assembly moves as a unit along the graduations of the bar to bring the jaws in contact with the work. Readings are taken in thousandths of an inch by reading the position of the vernier plate in relation to the graduations on the stationary bar.
You might also like to view...
The switching valves on the AIR pump have failed several times. Technician A says that a defective exhaust check valve could be the cause. Technician B says that a leaking exhaust system at the muffler could be the cause. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
The operation of the SQO instruction in the Logix processor ________
A) Is the same as that for the PLC 5 and SLC 500 B) Uses a control data type for only the control parameter C) Uses tags for the file, destination, and control parameters D) All of the above
The asynchronous inputs are normally labeled ________ and ________, and are normally active ________ inputs
A) START, STOP, low B) PRE, CLR, low C) ON, OFF, high D) SET, RESET, high
If only a few circuits are to be made, it is cheaper to use ____ integrated circuits.
A. monolithic B. hybrid C. thin-film D. thick-film