The style or type of eye protection that is used must be able to provide sufficient protection from potential hazards. If a technician is going to be performing tasks such as chipping, grinding, sawing, drilling or chiseling, there is the danger of becoming injured by flying fragments, chips, filings, sand or dirt. In this case, the individual should be wearing eye protection that is equipped with __________. For severe exposure, a __________should be worn. If a technician is using an acetylene torch, the dangers associated with molten metal and flying particles are faced. In this case, __________ goggles are a good choice for eye protection, especially those equipped with tight-fitting __________.
What will be an ideal response?
side protection, face shield, welding, eye cups
You might also like to view...
Moving from startup to takeoff, the venture may encounter serious stresses because management practices do not necessarily scale properly.
Answer the following statement true (T) or false (F)
_______________ are a type of heating device that uses solid biomass pellets as fuel
Fill in the blank(s) with the appropriate word(s).
Use the following engine dimensions to calculate the compression ratio
Bore: 3.920 in. Stroke: 3.300 in. Gasket thickness: 0.050 in. Deck height: 0.010 in. Piston dish volume: 7.8 cc Combustion chamber volume: 59.0 cc A) 9.3:1 B) 9.4:1 C) 9.1:1 D) 9.2:1
If an electric furnace were equipped with three 5-kW heating elements, which device would allow them to cycle at different intervals?
A. interlock B. limit switch C. room thermostat D. sequencer