What are the guidelines for following the signal?
What will be an ideal response?
Guideline 1: Check the input and output tables.
Guideline 2: Match the input or output to the component/function it represents.
Guideline 3: Find the cause.
Guideline 4: If everything else if fine, check the signal interpretation device
You might also like to view...
A central station air-handling unit:
A) Combines the functions of the evaporator blower and the condenser blower. B) Consists of a fan and coil and usually handles a single room or zone. C) Is used instead of a fan and fan motor. D) Is used for large systems and is assembled on site using separate components.
A duty cycle is the percentage of a 10-minute period during which a welding machine can continuously
_____. a. maintain a constant voltage as the output current varies b. produce a constant current over a wide voltage range c. produce its rated amperage without overheating d. establish an arc between the end of the wire electrode and the workpiece
When a safety pop-off valve continuously unloads, which of the following should be performed first?
A. The governor should be replaced B. The compressor should be replaced C. The unloader air circuit should be checked D. The primary circuit pressure should be checked
A torque converter's turbine end-play has measured to be 0.070 in (1.5 mm). What action should the technician take?
A) Use longer flexplate bolts B) Nothing, the clearance is OK C) Replace or rebuild the torque converter D) Replace the flexplate shims with thicker shims