When calculating the load in volt-amperes for the main service-entrance conductors, the demand factor for the first 3,000 volt-amperes is 100%, the demand factor for all volt-amperes in excess of 3,000 volt-amperes is ___________________%.
Fill in the blank(s) with the appropriate word(s).
35
You might also like to view...
What causes the conductive surface area of the cable to decrease as signal frequencies increase?
A. Characteristic Impedance B. Changes in temperature C. Skin effect D. Bend radius
After you have conducted a future worth comparison of alternatives, what do you multiply the FW values by in order to obtain the AW values of the alternatives?
What will be an ideal response?
If the contacts on a starter become pitted, they should be:
A) Sanded and then coated with a fine layer of silver solder. B) Replaced. C) Jumped out to prevent nuisance trips. D) Dressed with a file to remove the pitting.
In a dual-fuel heat pump packaged system, when does the furnace go into use?
A) Only during winter conditions B) Once the outdoor temperature is below the balance point C) Once the outdoor temperature drops to the balance point D) Only when it is most economical