The first step in the process of shutting down a skid-steer loader is to _____.
a. set the parking brake
b. lower the bucket so it is flat on the ground
c. cycle the hydraulic controls to release pressure
d. place the operator controls in neutral
b. lower the bucket so it is flat on the ground
You might also like to view...
How would define compost? What makes using compost a sustainable nursery
practice?
What will be an ideal response?During a stall test, what is the maximum time that full stall can be maintained before you have to allow the transmission a cool down period?
A. 20 seconds B. 30 seconds C. 45 seconds D. 60 seconds
Which gas is generally considered to be the lean indicator? (The higher the level of this gas, the leaner the air-fuel mixture.)
A) HC B) CO C) CO2 D) O2
What is the annual leak rate of a system that holds 100 lb of refrigerant and loses three lb of refrigerant in a month?
A) 36 percent B) 3 percent C) The annual leak rate can only be determined at the factory. D) You must check for an entire year to calculate the annual leak rate.