How can scaling be reduced in water towers?
A) There is a small amount of water added constantly to the cooling tower.
B) There is a small amount of water drained off the cooling tower sump.
C) There is a small amount of water added once a day to the cooling tower.
D) There is a small amount of water saved from the cooling tower sump.
B
You might also like to view...
The _____ ______ _________ checks short-term fuel trim (STFT) and long-term fuel trim (LTFT) while the PCM is operating in closed loop.
Fill in the blank(s) with the appropriate word(s).
___________________________________ is the stage of development in grains when the maximum accumulation of dry matter in the seed occurs
Fill in the blank(s) with correct word
Compared to relay logic systems, solid state logic systems:
A) Use more power to operate. B) Consume no power to operate. C) Consume about the same amount of power to operate. D) Use less power to operate.
The temperature difference between the bubble point and the dew point of a zeotropic refrigerant is called:
A) Glide. B) Subcooling. C) Saturation. D) Superheat.