A note that provides a detailed description of requirements for the type and size of parts or material required is
known as a _____.
a. mark
b. parts list
c. specification
d. schedule of parts
c
You might also like to view...
Hydrated lime is obtained by treating
A) limestone with water. B) slaked lime with Portland cement. C) slaked lime with water. D) quicklime with Portland cement. E) quicklime with water.
Cylindrical roller bearings have a high radial capacity and assist in shaft alignment.
Answer the following statement true (T) or false (F)
Computer analysis. The columns and girder of the indeterminate rigid frame in Figure P5.57a are fabricated from a W18 × 130 wide flange steel section: A = 38.2 in. 2 and I = 2460 in. 4 . The frame is to be designed for a uniform load of 4 kips/ft and a lateral wind load of 6 kips; use E = 29,000 kips/in. 2 . The weight of the girder is included in the 4 kips/ft uniform load. (a) Compute the reactions, plot the deflected shape, and draw the shear and moment curves for the columns and girder, using the computer program. (b) To avoid ponding* of rainwater on the roof, the girder is to be fabricated with a camber equal to the deflection at midspan of the roof girder produced by the uniform load. Determine the camber Figure P5.57.
What components are found on both the compression cycle and the absorption cycle?
A) Compressor and condenser B) Generator and absorber C) Compressor and absorber D) Evaporator and condenser