Two technicians are discussing a stepped ECT circuit. Technician A says that the sensor used for a stepped circuit is different than one used in a non-stepped circuit. Technician B says that a stepped ECT circuit uses different internal resistance inside the PCM. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
B
You might also like to view...
Suppose the liquid phase consists of an equimolar mixture of compounds 1 and 2 at 350 K. Set up a system of equations that would allow you to calculate the pressure and composition of the vapor phase in equilibrium with this liquid at 350 K. You don’t need to solve the equations, but the number of equations and unknowns should be balanced such that they could be solved. You may assume the Margules parameters A12 and A21 are known even if you have no final answer to part A.
A pair of compounds identified as 1 and 2 have the following properties:
This pair of compounds forms an azeotrope at 350 K and P = 8.5 bar, with x1 = y1 = 0.31.
What two types of meters are commonly used in the industry?
What will be an ideal response?
If there are three lines of dimensions on the outside of a floor plan, describe the features that are typically dimensioned at each line of dimensions:
What will be an ideal response?
If the incorrect grade of engine oil is used in and engine equipped with a variable displacement engine, what diagnostic trouble code (DTC) could be set?
A) P0011 B) P0521 C) P0300 D) P0420