Answer the following statements true (T) or false (F)

1. During the coupling phase in a torque converter, the stator one -way clutch remains locked.
2. The torque converter clutch is controlled by a hydraulic clutch pedal.
3. Draining the fluid from the pan and then refilling is a good way to replace all of the old ATF.
4. A few metal particles stuck to the pan magnet indicate a need for transmission overhaul.
5. When installing a new transmission pan gasket, it is recommended to seal it with RTV sealer.


1. False
2. False
3. False
4. False
5. False

Trades & Technology

You might also like to view...

Chimney brackets are sold _____ size.

A. in pairs in a 24" or 35" B. in pairs in a 25" or 36" C. singly in 26" or 34" D. singly in 36" or 48"

Trades & Technology

If the overall mixture is 80% by mole methanol, will the mixture exist in one phase or two phases in equilibrium at 315 K? If it does phase split, what is the composition of the equilibrium liquid phases?

Consider the methanol + cyclohexane system in the figure.

A. The mixture exists in one liquid phase.
B. The mixture exists in two liquid phases. The composition of the “methanol rich” phase is 80% methanol, while the composition of the “cyclohexane rich” phase is 15% methanol.
C. The mixture exists in two liquid phases. The composition of the “methanol rich” phase is 90% methanol, while the composition of the “cyclohexane rich” phase is 70% methanol
D. The mixture exists in two liquid phases. The composition of the “methanol rich” phase is 70% methanol, while the composition of the “cyclohexane rich” phase is 26% methanol
E. The mixture exists in one vapor phase.

Trades & Technology

Which technique may be used to shorten the construction time by overlapping the design and construction phases?

A. Fast-track construction B. Predesigned construction C. Design-build construction D. Prefabricated construction

Trades & Technology

When looking for the quality of materials and methods of construction for a floor assembly, you would refer

to the _____. a) specifications b) foundation plan c) floor plan d) structural drawings

Trades & Technology