What should be installed and torqued to factory specifications before machining a block?
A) Oil pan B) Main bearing caps
C) Front timing chain cover D) All of the above
B
You might also like to view...
Superheated ammonia enters a mixing chamber at a pressure of 50 psia at a mass flow rate of 5 lbm/s. Saturated liquid ammonia enters the chamber at a rate of 0.60 lbm/s, at 50 psia. Heat is lost from the chamber at a rate of 125 Btu/s. If the combined exit flow is saturated vapor ammonia at 50 psia, determine the temperature of the superheated ammonia which entered the chamber.
State 1: Vapor inlet; State 2: Saturated liquid inlet; State 3: Outlet Given: P1 = P2 = P3 = 50 psia; m?1= 5.0 lbm/s; x2 = 0.0; m?2=0.60lbms; x3 = 1.0; Q?=?125 Btu/s Assume: Given no other information regarding the mixing chamber, make the following common assumptions: W?=?KE=?PE=0 Also, assume the mixing chamber is a multiple-inlet, single-outlet, steady-state, steady-flow device. What will be an ideal response?
If an actual part is large, the dimensions for a drawing are reduced by multiplying the actual dimension of the part by a scale factor greater than 1.
Answer the following statement true (T) or false (F)
At what temperature is the catalytic converter fully effective?
A) 420 deg F B) 100 deg F C) 500 deg F D) 1000 deg F
Give the main characteristics of sustainable sites:
What will be an ideal response?