The type of drawing that depicts the weldment that must be fabricated and the pieces to be joined by welding

is the _____.

a. section view
b. isometric view
c. assembly drawing
d. welding detail drawing


d

Trades & Technology

You might also like to view...

A mobile crane’s center of gravity _____.

a. is always at the center of its rotation b. is always at the boom attachment point c. must remain to the operator’s back at all times d. moves as its configuration changes

Trades & Technology

The output of the wind turbine depends on the size of the rotor and the ____ of the wind passing through it.

a. speed b. temperature c. composition d. density

Trades & Technology

A low-pressure switch connects the compressor or the coil of the compressor contactor to terminal ________

A) 3, since it is for the time delay B) 4, since it is part of the normally closed contacts C) 4, since it is part of the normally open contacts

Trades & Technology

Hollow rivets are assembled on a pin often called a(n) ____.

A. mandrel B. nozzle C. anchor D. clinch

Trades & Technology