When boosting the battery of a refrigeration unit what is the last battery connection to be made?
A. Positive jumper cable to the positive (+) post of the stalled battery.
B. Connect one end of the negative jumper cable to the negative (-) post of the jumper battery.
C. Connect one end of the negative jumper cable to a good chassis ground connection on the stalled unit away from the stalled battery.
D. Connect the positive end of the jumper cable to the positive (+) of the jump starting battery.
Answer: C
You might also like to view...
Which of the following statements is LEAST-Likely true?
A. Later-model cars with manual shift transmissions have a clutch start switch. B. Continuity when the clutch is depressed allows current to flow through the switch to the starter. C. A starter drive can be bench tested to see if it will slip. D. Many shops replace solenoids with starter drives.
What is the dew point temperature?
What will be an ideal response?
The windows would have been scheduled on the same sheet as the ________ schedule.
Fill in the blank(s) with the appropriate word(s).
Which type of pipe should never be used for fuel oil lines?
A. copper B. steel C. brass D. PVC E. c and d