Which of the following is an incorrect statement about the use of turnbuckles?
a. Turnbuckles are used to adjust the length of rigging connections.
b. The working load limit of a hook-end turnbuckle is greater than comparably sized eye and eye
turnbuckles.
c. Turnbuckles should be tightened with a wrench of the proper size.
d. When using multi-legged slings, only one turnbuckle should be used per leg.
b
You might also like to view...
The output of a gas furnace has large quantities of carbon dioxide, which must be monitored carefully. This table gives the percentage of CO2 in the output, with samples taken every 9 seconds.
 FIGURE 1.png)
(a) Group these measurements into equal classes, and construct a frequency distribution table for the data. (Use a spreadsheet to help solve this problem.)
(b) Compute the mean, median, and mode of the data.
(c) Compute the standard deviation of the data.
A superintendent plans to build a 3,000 ft.2 tee. He wants to place a 12-inch layer of loamy sand over the existing soil. One cubic yard of the loamy sand equals 1.2 tons. How many tons are needed?
What will be an ideal response?
The P-type or anode end of the diode is the positive end, and the N-type or ____ end of the diode is the negative end.
a. resistor b. neutral c. cathode d. bias
What is the purpose of a liquid distributor?
What will be an ideal response?