Three reference points for checking temperature measuring instruments are ____.
A. 0°F, 100°F, 110°F
B. -460°F, 0°F, 32°F
C. 32°F, 98.6°F, 212°F
D. 32°F, 100°F, 250°F
Answer: C
You might also like to view...
Pinion preload is being set on a pinion using a collapsible spacer. After tightening the pinion nut the preload exceeds the specification by 20 inch pounds. What should the technician do?
A) Loosen the nut until the proper preload is measured B) Leave the nut in place, since the bearings will "wear in" C) Replace the bearings and start over D) Replace the spacer and repeat the adjustment
Blue nails are usually a sign of:
What will be an ideal response?
The pulse generator ________
A) Is used as a tachometer reference signal by the computer and has no other function B) Signals the electronic control unit (module) C) Signals the computer that fires the spark plug directly D) Fires the spark plug directly
The grades of fuel oil are 1 through 6 with:
A) 6 being the lightest and most distilled and having the highest heating capacity. B) 1 being the lightest and most distilled and having the highest heating capacity. C) 1 being the lightest and most distilled and having the lowest heating capacity. D) 6 being the lightest and most distilled and having the lowest heating capacity.