The maximum allowable difference between the front and rear working angle of a drive shaft is _________,
A) 1 deg B) 1/2 deg C) 3 deg D) 1/4 deg
B
Trades & Technology
You might also like to view...
Select the one with the lowest initial investment cost because none of the increments were justified.
What will be an ideal response?
Trades & Technology
Typical TP sensor voltage at idle is about ________
A) 1.5 to 2.8 volts B) 2.50 to 2.80 volts C) 0.5 volt or 10% of WOT TP sensor voltage D) 13.5 to 15.0 volts
Trades & Technology
Headlights can be aimed by using ________
A) An aiming screen B) A bubble level C) Either A or B D) Neither A nor B
Trades & Technology
Three resistors are connected in series across a 60 V source. If VR1 = 19 V and VR2 = 14.3 V, then what is the voltage drop across R3?
A) 14.3 V B) 19 V C) 45.7 V D) 26.7 V
Trades & Technology