The subsequent problems, each of which is independent of the others, deal with the figure below,If the NC switch is held down (i.e., not in the position shown) while the NO button is pressed and held down, what is the final value of X?

A. it is definitely 1
B. it is definitely 0
C. it depends on the previous history of the switch and button states


Answer: A

Trades & Technology

You might also like to view...

?Which of the following would represent the fastest engine rpm?

A. ?High idle B. ?Rated speed C. ?Peak torque rpm D. ?Lug rpm

Trades & Technology

Define and describe each of the following: utilitarianism, egoism, duty, respect, rights.

What will be an ideal response?

Trades & Technology

Which of these statements is NOT a true conclusion from a battery load test?

A. The battery needs to be replaced if the voltage dropped below 9.6 volts while under a load but rose above 12.4 volts when the load was removed B. The battery should be charged and then retested because it dropped below 9.6 volts and didn't rise above 12.4 volts when the load was removed C. The battery should be charged and then retested because it dropped below 9.6 volts and rose above 12.4 volts when the load was removed D. The battery is good because the voltage dropped only to 10.3 volts while under load

Trades & Technology

A 22.5 degree bend is a __________  bend

Fill in the blank(s) with the appropriate word(s).

Trades & Technology