Reinforcing bars should be _____

a. heated with a torch before bending
b. bent no more than 90 degrees
c. lubricated before bending
d. bent cold
AGRICULTURAL MECHANICS AND METAL TECHNOLOGIES - TX. ED., VOL. 1 MODULE 27304-14 EXAM 2
Copyright © 2017 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy
contains this notice.


d

Trades & Technology

You might also like to view...

A glycol mixture (specific heat = 0.88 Btu/pound-°F?) is circulated to a geothermal well where it picks up 16°F in temperature.  If the mixture is moving 1,272 Btu/min, what is the flow rate of the glycol?

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Heat flows from the product into the evaporator because:

A) The refrigerant in the evaporator has fewer BTU/lb than the product. B) The refrigerant in the evaporator has a lower specific heat than the product. C) The evaporator is at a lower pressure than the product. D) The evaporator is at a lower temperature than the product.

Trades & Technology

Explain AFUE

What will be an ideal response?

Trades & Technology

The interpreting data received from four different satellites concurrently through a process called ________________

Fill in the blank(s) with correct word

Trades & Technology