In the early 1900s, chickens were fed only limited grains
Indicate whether the statement is true or false
T
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. The tolerance zone for a flatness tolerance is the space between two perpendicular planes. 2. If a flatness tolerance is applied to a surface, the high and low points of the surface must be within the tolerance zone. 3. If the limit of the flatness deviation provided by Rule #1 is sufficient for the function of the application, there is no need to specify a flatness tolerance. 4. Where a flatness tolerance is applied to a surface that is associated with a size dimension, and Rule #1 applies to the size dimension, the flatness tolerance value must be more than the size tolerance. 5. A dial indicator, also known as a dial gage and probe indicator, is an instrument used to accurately measure small linear distances, and is frequently used in inspection of parts.
? more than 78.6 is 104.8.
Answer the following statement true (T) or false (F)
A 30-microfarad capacitor is in parallel with a 15-microfarad capacitor. The total capacitance is _____.
a. 15 b. 30 c. 45 d. 100
A developer wants to provide access to a new building from a driveway placed 1000 ft upstream of a busy intersection. He is concerned that queues developing during the red phase of the signal at the intersection will block access. If the speed on the approach averages 35 mi/hr, the density is 50 veh/mi, and the red phase is 20 sec, determine if the driveway will be affected. Assume that the traffic flow has a jam density of 110 veh/mi and can be described by the Greenshields model.
What will be an ideal response?