___________ is the angular separation between the half-power points on an antenna's radiation pattern

A. Bandwidth
B. Gain
C. Beamwidth
D. Resonance


C

Trades & Technology

You might also like to view...

7/8 - 11/32 = ____.

A. 17/32 B. 11/32 C. 13/32 D. 15/32

Trades & Technology

The maximum value of a short circuit current from line-to-neutral (grounded) _____.

a. is 120V b. is 240V c. will vary depending on the distance from the source to the fault d. is the maximum capacity of the system

Trades & Technology

When concrete is being delivered to a construction site, an area must be set aside for _____.

a. truck parking b. slump testing c. refueling the trucks d. weighing loads

Trades & Technology

What should be done if a furnace with a tripped primary control has oil in the combustion chamber?

A) Disconnect the vent connector before firing the furnace to avoid soot accumulation in the vent B) Push the reset button and let the fire burn off the excess oil C) The oil must be cleaned out before firing the furnace D) Burn off the excess oil using a propane torch before firing the furnace

Trades & Technology