How is the high-voltage (HV) battery charged in a plug-in hybrid electric vehicle (PHEV)?
A) Operating the ICE at idle after returning from a trip
B) Using an external charging station or electrical outlet
C) Using the ICE to turn the motor/generator to fully charge the HV battery
D) Can be charged to full capacity by using a special dealer-only high-voltage charger
B
You might also like to view...
A small ____ home is a home that is generally designed for a small urban lot.
A. footprint B. baseline C. impact D. definition
Nippon Steel’s expenses for heating and cooling a large manufacturing facility are expected to increase according to an arithmetic gradient beginning in year 2. If the cost is $550,000 this year (year 0) and will be $550,000 again in year 1, but then are estimated to increase by $40,000 each year through year 12, what is the equivalent annual worth in years 1 to 12 of these energy costs at an interest rate of 10% per year?
What will be an ideal response?
On an exposed-nail roll roofing installation, the lower edge of the roofing material is fastened to the roof deck
by _____. A) nailing or stapling the material to the roof deck B) cementing the edge of the material to the layer below it C) applying cement to the entire underside of the roofing material D) cementing the edge of the material to the layer below it and nailing the material to the roof deck
As we discussed in this chapter, when selecting materials for mechanical applications, the value of the modulus of resilience for a material shows how good the material is at absorbing mechanical energy without sustaining any permanent damage. Another important characteristic of a material is its ability to handle overloading before it fractures. The value of modulus of toughness provides such information. Look up the values of modulus of resilience and modulus of toughness for (a) titanium and (b) steel.
What will be an ideal response?