A wall brace is positioned so that it makes an angle of 48.00° with the floor. The brace is fastened to the floor at a distance of 10.00 feet from the foot of the wall. What is the required length of the brace to the nearest tenth inch?
Fill in the blank(s) with the appropriate word(s).
14 ft 11.3 in
You might also like to view...
An insulated steam turbine receives steam at 5.0 MPa and 400°C, and the steam exits the turbine at 10 kPa with a quality of 0.95. The volumetric flow rate of the steam entering the turbine is 2.5 m3/s. Determine the power produced by the turbine
Given: P1 = 5.0 MPa; T1 = 400°C; P2 = 10 kPa; x2 = 0.95; V?1= 2.5 m3/s; Steam Assume: Q? = 0 (insulated) Also, for a turbine, assume steady-state, steady-flow, single-inlet, single-outlet flow, with ?KE = ?PE = 0 What will be an ideal response?
What do the letters JJ mean in a wheel designation size labeled 14x7JJ?
A) The back spacing of the rim B) The shape of the flange area C) The offset of the rim D) The bolt circle code
How did serpentine heat exchangers compare to older heat exchangers?
A) The serpentine heat exchangers became straighter and longer. B) The serpentine heat exchangers utilized a pressure switch. C) The serpentine heat exchangers required a heat-induced fan, causing negative pressure. D) The serpentine heat exchangers were made from plastic.
The tire placard is always mounted in the glove compartment.
Answer the following statement true (T) or false (F)