The output of a J-K flip-flop is always LOW. The most likely cause is ________
A) the PRE input is stuck LOW B) the J input is stuck LOW
C) the CLR input is stuck LOW D) the K input is stuck LOW
B
You might also like to view...
The incubation period for chicken eggs is 32 days
Indicate whether this statement is true or false.
The major bearing(s) used with a clutch assembly is (are) the ________
A) Release bearing that is mounted at the front of the transmission B) Pilot bearing that supports the end of the transmission input shaft C) Both A and B D) Neither A nor B
Select possible cause(s) of an iced-up evaporator on a commercial freezer. You may select more than one
A) Bad defrost timer motor B) Open defrost heaters C) Bad evaporator fan motor D) Bad condenser fan motor E) Shorted defrost termination switch F) Dirty condenser
One of two basic types of drawings cutting through an entire building or structure, ____ cut across the entire width of a building or structure and may be represented as scaled drawings or symbolic representations.
A. longitudinal sections B. cross sections C. lengthwise sections D. lateral sections