A cylindrical part of diameter d is loaded by an axial force P. This causes a stress of P/A, where If the load is known with an uncertainty of ±10 percent, the diameter is known within ±5 percent (tolerances), and the stress that causes failure (strength) is known within ±15 percent, determine the minimum design factor that will guarantee that the part will not fail.
What will be an ideal response?
Trades & Technology
You might also like to view...
Many filter manufacturers use ____ to inhibit calcium or lime scale buildup.
A. wool B. polysorbate C. polyphosphate D. polyphenols
Trades & Technology
As the load on an engine increases, the manifold vacuum decreases and the manifold absolute pressure ________
A) Decreases B) Increases C) Changes with barometric pressure D) Remains same value
Trades & Technology
Which one of the following is made up of flip-flops?
A) Multiplexer B) Comparator C) Converter D) Register
Trades & Technology
How is diagnosis used in automotive repair? What are the seven steps most good technicians use in diagnosis?
What will be an ideal response?
Trades & Technology