In the compression refrigeration cycle, the refrigerant is saturated:
A) In the compressor and condenser. B) Only in the compressor.
C) Only in the metering device. D) In the evaporator and condenser.
D
You might also like to view...
All of the following statements are true EXCEPT:
A. fumes from some types of silicone RTV sealants used on the engine can contaminate O2 sensors. B. lead in fuel can contaminate an O2 sensor. C. if the pores of an O2 sensor become plugged, its response time and output voltage will increase. D. carbon buildup on an O2 sensor can be from an overly rich air-fuel mixture, engine oil consumption, or a bad turbocharger turbine seal.
All construction activity and debris should be kept within the property boundaries unless permission is first obtained from neighboring landowners.
Answer the following statement true (T) or false (F)
What type of thermostat is typically used with electric baseboard heaters?
A) Thermostats are not used with baseboard heaters. B) Wireless thermostats C) Low-voltage thermostats D) Line-voltage thermostats
How should a typical timing gear be installed onto a shaft?
A. Press the gear on with a air-over-hydraulic press. B. Cool the shaft as much as possible. C. Heat the gear to the manufacturers specified temperature. D. Heat the shaft and gear to manufacturers specified temperature.